SHOP QAD

berger hole adapter

  1. Align the opening of the Adapter with the Berger Button Hole on the bow as shown in Figure 1.
  2. Push the Adapter forward until it is flush with the back of the riser as shown in Figure 2.
  3. Secure Adapter block to the riser by screwing Mounting Block Screw into Berger Button Hole.
  4. Make sure the Adapter is level to ensure proper tuning and setup of rest.
  5. Attach Integrate Rest to the Adapter according to specific rest mounting instructions.
  6. Remove decal backing and affix to cover opening.